La-crosse-technology WS-8610 Uživatelský manuál

1 WS-8610 WIRELESS DATA LOGGING WEATHER STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this revolutionary 433MHz data log

10 LEARNING/ REMOVING A REMOTE TEMPERATURE/HUMIDITY SENSOR (CHANNEL) After replacement of batteries of a particular remote temperature/humidity sen

11 Note: • If user has set “Enr = 2” and three remote temperature/humidity sensors are on, the data only from channel No. 1 and 2 will be saved in

12 b. The Min temperature and Min humidity In normal display mode, press the mode key two times. The minimum temperature and humidity

13 e. The history data sets of temperature and humidity In normal display mode, press the mode key five times. The “hist” icon will

14 To set the low humidity alarm: 1. In normal display, press the Plus or Minus key to select a temperature/humidity sensor channel (the temperatu

15 To set the low temperature alarm: 1. In normal display, press the Plus or Minus key to select a temperature/humidity sensor (the temperature/hu

16 MEMORY CAPACITY The indoor weather station provides data-logging function. The temperature and humidity data are saved into the Memory of the in

17 CLEARING ALL DATA AND SETTINGS OF THE INDOOR WEATHER STATION FROM THE PERMANENT MEMORY (FACTORY RESET) The factory reset needs to be launched if

18 USING THE WEATHER STATION WITH PC With the aid of the software supplied, the indoor weather station may provide the following additional functi

19 POSITIONING THE INDOOR WEATHER STATION: The indoor weather station provides the option of table standing or wall mounting the unit. Before wall

2 HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION The indoor weather station uses 3 x AA, 1.5V batteries. To install and replace the ba

20 The mounting surface can affect the transmission range. For example, the unit is attached to a piece of metal; it may either reduce or increase t

21 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and

21INSTRUCTION MANUAL FOR DATA RECORDER SOFTWARE (WS-8610) Introduction This weather station together with the Data Recorder software is a high qual

22Next install the Data Recorder software as follows: 1. Switch on the PC and insert the CD-ROM into the CD-ROM Drive. 2. The CD-ROM will automat

23Setting the parameter of the Data Recorder software Before importing data from indoor weather station, you may set the display format in the Optio

24Data storing options: a. Port ID (COM1 to 4) – decide which COM port to be used b. Choosing recoding history file – Once you import a set o

25Importing data from the indoor weather station to the PC 1. After successful installation, you can open the Data Recorder program by clicking the

26 The data stored in the indoor weather station is now displayed in the program, with the date and time of record and the corresponding temperature

27Open the data file in Microsoft Excel Once you have created a Text file for data you can view the file and convert it into Microsoft Excel file by

284. After finishing the Text import setting, each data will be carried in a separate cell. In addition you may now save the data in an Excel format

3 QUICK SET-UP GUIDE Hint: Use fresh good quality alkaline batteries. 1. Have the indoor weather station and remote temperature/humidity sensor 3

29WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and wo

4 FUNCTION KEYS: There are 5 function keys on the weather station: Set key • In normal display mode, press and hold for 3 seconds to

5 Alarm key (AL) • Press and hold for 3 seconds to enter the alarm setting mode. • In alarm setting mode, press to toggle between the following se

6 LCD CONTRAST SETTING: The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is “LCD 5”): 1. In normal

7 DAYLIGHT SAVING TIME ON/OFF SETTING Note: • The function of day nighttime saving on/off is only applicable to specific area in United States us

8 12/24-HOUR FORMAT SETTING: The time display can be selected to show hours in 12-hour or 24-hour settings. (Default 12-Hour) 1. Pres

9 CALENDAR SETTING: The date default of the weather station is 1. 1. in the year 2004. Once the radio-controlled time signals are rec