La-crosse-technology WS-9031U Uživatelský manuál stáhnout pdf (Strana 1)

WS-9031U Quick Set-up instructions

1) Insert two AA batteries into the remote transmitter.

2) Insert three AA batteries into the Weather Projection Station and/or plug into wall.

Note: When starting or restarting your weather projection station the transmitter should be started first and then your

weather projection station. After power is supplied (either battery or AC) ensure that no buttons are pressed

for 15 minutes. This will allow time for the weather projection station to communicate with the remote

transmitter as well as receive the WWVB signal.

3) Wait 15 minutes for WWVB reception and remote temperature and humidity.

4) If there is no WWVB reception, manually set the time, date and time zone (instructions are also in the Manual Settings

section of the main manual).

Manually setting the time zone and time

1) Press and hold the SET button (located on the back of the unit) until

the LCD digits start flashing.

2) Press and release the SET button once or until the current TIME ZONE

is displayed.

3) Press and release the CH/+ key to advance the time zone to your time

zone.

4) Press and release the SET key four times or until the

HOUR digit begins to flash.

5) Press and release the CH/+ key to select the correct

hour. “PM” will appear for hours from 12 noon until

midnight.

6) Press and release the SET key to advance to the MINUTE setting mode.

7) Press and release the CH/+ key to select the correct minute.

-Optional- setting the Day, Month and Year (This will be set automatically upon WWVB reception)

8) Press and release the SET key to advance to the YEAR setting mode.

9) Press and release the CH/+ key to select to the correct year.

10) Press and release the SET key to advance to the MONTH setting

mode.

11) Press and release the CH/+ key to select to the correct month.

12) Press and release the SET key to advance to the DAY setting mode.

13) Press and release the CH/+ key to select the correct day of the month.

14) Press and release the SET key three times to complete the settings or wait 15 seconds and the display will exit the set-

up screen automatically.

Note: All manual settings will be updated and corrected once the WWVB signal is received (typically overnight

when the signal is strongest).

5) Place the WS-9031U in your desired location.

6) Mount the transmitter in a shaded area protected from rain, where remote temperature and humidity measurements are

desired (on the North side of a house for example).

Note: When placing and mounting the transmitter and weather projection station please keep in mind that the

transmitting distance from the transmitter to the weather projection station is 80 feet. Any obstacles (such as

walls) will decrease the effective range of the transmission.

Note: The remote transmitter is weather resistant but not waterproof. High humidity and mist will not damage the

transmitter but direct rain will. The maximum range between the transmitter and weather projection station is

80ft. open air (no obstructions). Any resistance (i.e. walls, furniture, etc) between the two will decrease the

effective operating range.

7) The projector will activate and remain on if the Weather Projection Station is plugged in. If only batteries are used, the

projector will only be activated when the SNOOZE button is pressed.

8) See “How to use the projector” instructions for projection direction, etc.

Last digit flashing

Time Zone Flashing

(-5h equals Eastern

Time zone or GMT –5)

U.S. Time

zone map

Hour flashing

Minutes flashing

Year

Date and month (24hr time format)

Month and date (12hr time format)

1 2 3 4 5 6 ... 48 49

Shrnutí obsahu

Strany 1

WS-9031U Quick Set-up instructions 1) Insert two AA batteries into the remote transmitter. 2) Insert three AA batteries into the Weather Projection

Strany 2 - DEL TIEMPO

following sensor. The Weather Projection Station will number the sensors in the order of set-up, i.e. the first sensor will have the temperature/hum

Strany 3

If the batteries are used as the main power source: 1. Projected image brightness, alarm volume and back-light strength will be weaker when batteri

Strany 4

1. Connect the AC-DC adapter to a wall socket. Plug the adapter into the jack at the side of the Weather Projection Station. All segments of the LC

Strany 5

sensors in the order of set-up, i.e. the first sensor will have the temperature/humidity displayed with the number 1 against it and so on. 5. With

Strany 6

Note: If the Weather Projection Station is powered through the AC-DC adapter, the projection will be constantly ON. If the Weather Projection Sta

Strany 7 - HYGRO SENSOR

up the Weather Projection Station again. Proceed from step 1 in “Setting Up”,“Battery Installation” or “How to use the Projector Adaptor”. HOW TO U

Strany 8 - SETTING UP

3. Adjust the projection image in an upright position with the key. Note: If more than one Thermo-hygro Sensor is used, only the temperature fro

Strany 9 - BATTERY INSTALLATION:

announced at the top of the minute in “Coordinated Universal Time”, which is also known as Greenwich Mean Time (GMT). This time does not follow Dayl

Strany 10

ALARM 1 key HOUR/IN key MIN/OUT keyALARM 2 key DIRECTION key SET keyCH/+ keyDISPLAY keySNOOZE key SET key • Enter manual setting m

Strany 11

• Stop the alarm during alarm ringing • Stop snooze mode • Back-light on CH/+ key • Increase value in all setting modes • Stop the alarm during

Strany 12

WS-9031U WEATHER PROJECTION STATION POSTE METEO A PROJECTION ESTACION CON PROYECCIÓN DEL ESATDO DEL TIEMPO Instruction Manual Mode d’emploi Manua

Strany 13

ALARM 1 key • Enter/exit the alarm 1 setting mode • Active/de-active the alarm time 1 (even inside snooze mode) • Stop the alarm during alarm rin

Strany 14 - RESETTING

• Stop the alarm during alarm ringing • Stop snooze mode • Back-light on ALARM 2 key • Enter/exit the alarm 2 setting mode • Active/de-active t

Strany 15 - SURFACE:

Moon phase icon Alarm time Weather tendency indicator TimeCalendar display Indoor relative humidity in RH% Time reception icon (for WWVB time) Alarm

Strany 16

MANUAL SETTINGS: The following manual settings can be changed when pressing the SET key for: • LCD contrast setting • Time zone setting • DST (Da

Strany 17 - Weather Projection Station:

2. Use the CH/+ key to view all levels of contrast. 3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone setti

Strany 18 - SET key

DST (DAYLIGHT SAVING TIME) SETTING: Note: The DST default is “ON”, meaning that the received time will automatically be adjusted according to Da

Strany 19 - DISPLAY key

In area where reception of the WWVB time is not possible, the WWVB time reception function can be turn OFF. The clock will then work as a normal Qua

Strany 20 - MIN/OUT key

MANUAL TIME SETTING: In case the Weather Projection Station cannot detect the WWVB-signal (for example due to disturbances, transmitting distance, e

Strany 21 - SNOOZE key

CALENDAR SETTING: The date default of the Weather Projection Station is 1. 1. in the year 2003. Once the radio-controlled time signals are rec

Strany 22

SNOOZE SETTING: The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes): 1. Use the CH/+ key to set the snooze ti

Strany 23 - LCD CONTRAST SETTING:

WEATHER PROJECTION STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this state-of-the-art weather projection station as an e

Strany 24 - TIME ZONE SETTING:

Icons flashing 1. Use the CH/+ key to toggle between “°F” or “°C”. 2. Confirm with the SET key and enter the Weather forecasting icon sensitivity

Strany 25

ALARM SETTING: The alarm time can be set when pressing the ALARM 1 or ALARM 2 key. 1. Press the ALARM 1 or ALARM 2 key until the alarm digits

Strany 26 - 12/24-HOUR SETTING:

SNOOZE ACTIVATION AND STOPPING THE ALARM: The snooze function can be activated when the alarm is ringing by pressing the SNOOZE key. However the sno

Strany 27 - MANUAL TIME SETTING:

New Moon Full Moon Small Waxing Crescent Large Waning Gibbous Large Waxing Crescent Small Waning Gibbous First Quarter Las

Strany 28

• High Tide occurs during New Moon and Full Moon phase • Medium Tide (Med) occurs during any of the other moon phases • Low Tide occurs during Fi

Strany 29 - °F/°C TEMPERATURE SETTING:

The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example

Strany 30

hours. By doing this, the Weather Projection Station will not mistake the new location as being a possible change in air-pressure when really it is

Strany 31 - ALARM SETTING:

INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE: The indoor temperature and humidity data, the indoor comfort indicator are automatically updated an

Strany 32 - MOON PHASES SYMBOL

data will also be displayed in the time and calendar sections (for temperature data only). 2. To reset the MIN/MAX data, press and hold the HOUR/IN

Strany 33 - Moon Tide:

TOGGLING AND RESETTING THE OUTDOOR RECORDINGS: 1. To toggle between the outdoor current, MIN/MAX temperature and humidity data and the times (for

Strany 34

Battery compartment LCD Display Function keys FEATURES: The Weather Projection Station Projector Function keysSNOOZE key

Strany 35

TO EXIT THE MANUAL SETTING MODE To exit the manual setting mode anytime during the manual setting modes, press the SNOOZE key anytime or wait for au

Strany 36 - WEATHER TENDENCY INDICATOR

1. The distance of the Weather Projection Station or sensor should be at least 6 feet (2 meters) away from any interfering sources such as computer

Strany 37 -

POSITIONING THE THERMO-HYGRO SENSOR: Each sensor is supplied with 2 wall mounting screws and plastic anchors. To wall mount simply: 1. Secure the w

Strany 38 - TEMPERATURE

• Do not submerge the units in water. • Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries

Strany 39

Indoor temperature checking interval : every 15 seconds Indoor humidity checking interval : every 20 seconds Outdoor temperature reception :

Strany 40 - BACK-LIGHT

by this product should be taken only as an indication and not as being totally accurate. • The specifications of this product may change without pr

Strany 41

if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Techn

Strany 42 - CARE AND MAINTENANCE:

use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference

Strany 43 - SPECIFICATIONS:

2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: [email protected] (warranty work) sales@lacross

Strany 44 - LIABILITY DISCLAIMER

FCC ID: OMO-01RX (receiver), OMO-01TX (sensor) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TW

Strany 45

• WWVB Radio controlled time with manual setting option • Time reception ON/OFF (user selectable) • 12/24 hour time display • DST ON/OFF (dayli

Strany 46

• Projection with adjustable brightness and projection orientation possible • LCD contrast selectable • LED back light • Low battery indicator •

Strany 47

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER PROJECTION STATION The Weather Projection Station uses 3 x AA, IEC LR6, 1.5V batteries. To install a

Strany 48

2. Insert the batteries, observing the correct polarity (see marking). 3. Replace the battery cover on the unit. Note: In the event of changing b

Strany 49

BATTERY INSTALLATION: 1. First, insert the batteries into the Weather Projection Station (see “To install and replace batteries in the Weather Proj

Příbuzné modely WS-9520

Komentáře k této Příručce

Žádné komentáře

La-crosse-technology WS-9031U Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Měřící nástroje La-crosse-technology WS-9031U. La Crosse Technology WS-9031U User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely WS-9520

Komentáře k této Příručce

La-crosse-technology WS-9031U Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Měřící nástroje La-crosse-technology WS-9031U. La Crosse Technology WS-9031U User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely WS-9520

Komentáře k této Příručce

Související produkty a manuály pro Měřící nástroje La-crosse-technology WS-9031U